Influence of flue gas characteristics on filter bag When the bag filter is used in the chemical industry, coal-fired power plants, steel and non-ferrous metals and other industries, the characteristics…
Maintenance of dust removal air source system of dust collector Control of cleaning pressure: During operation, the pressure of the cleaning gas source is controlled between 0.08-0.1MPa, so that it…
Filtration mechanism of membrane filter The membrane-coated filter material is a composite of a microporous membrane made of dispersed polytetrafluoroethylene resin and various substrates. The biggest feature of the filter…
Air inlet method of bag filter The air inlet mode of the bag filter can be divided into three modes: upper air inlet, lower air inlet and side air inlet.…
Applicable working conditions of pre-sprayed filter bag 1、The dusty gas contains liquid viscous substances such as oil fume. This sticky substance will not corrode the filter bag. Due to the…
Operation method of pre-coating filter bag 1、The pre-coating of the filter bag should cut off and stop the ash cleaning system before the combustion or the start of the production…
Precautions for handling gas with high dust concentration To process gas with high dust concentration, cyclone dust collector or gravity dust removal equipment can be installed as pre-dust removal. However, this…
The influence of a large amount of dust accumulation in the dust bucket of the dust collector on the bag dust collector On the one hand, it affects the processing…
Precautions for handling hygroscopic and deliquescent dust 1、It is not allowed to operate continuously regardless of whether the dust source facility is operating or not. It should be activated only…
Maintenance of bag filter 1、The manager of the pulse bag filter should be familiar with the principle, performance, and use conditions of the filter, and master the adjustment and maintenance…
Send a Quote Request