Micron Needle Felt - Filmediagroup Homepage

Needle Felt for Liquid Filtration

Micron needle felt is a high-efficiency depth filtration material widely used in the field of liquid filtration. It is produced through a precision mechanical needle-punching process that intricately interweaves fibers to form a three-dimensional, porous non-woven filter medium. Thanks to its high porosity, low operating resistance, excellent dirt-holding capacity, and cost-effectiveness, micron-rated liquid filtration needle felt has become an indispensable, high-efficiency medium in industrial liquid filtration—representing a perfect blend of traditional and modern filtration technologies.

Typical Application Industries

Fine chemical solution filtration
Pharmaceutical industry: liquid clarification and impurity removal
Food and beverage filtration (syrups, alcoholic beverages, fruit juices)
Electroplating solutions and ultrapure water pre-treatment for the electronics industry
Industrial wastewater treatment and reuse systems
Oil-water separation and emulsion purification

Inquiry

WhatsApp

Description

01. Polyester Micron Needle Felt

Performance Parameter	Weight (g/sm)	Thickness (mm)	Air Permeability (cbm/sm/min)	Tensile strength(N/5×20cm)		Tensile Elongation(%)		Operating Temp.(°C/℉)	Max Surge Temp.(°C/℉)	Suitable P.H. value
Model	/	/	/	Warp	Weft	Warp	Weft	/	/	/
PE-01	530	3.5	10	1000	1800	50	50	90/194 (Dry Heat)	150/302 (Dry Heat)	4~12
PE-05	530	2.5	22	800	1000	60	60			4~12
PE-10	480	2.2	24	800	1000	60	70			4~12
PE-25	480	2.8	35	500	800	70	70			4~12
PE-50	430	3.5	70	500	600	100	80			4~12
PE-75	430	3.5	80	500	600	100	80			4~12
PE-100	380	3.5	100	500	500	100	100			4~12
PE-200	380	3.8	100	500	600	110	100			4~12

Filter Materials Physical and Chemistry Performance

Fiber	Abrasion resistance	Weakly acid	Strongly acid	Weakly alkali	Strongly alkali	Solvent	Temperature(℃/℉)
PE	Excellent	General	Poor	Good	Good	Good	135/275 -149/300.2

02. Polypropylene Micron Needle Felt

Performance Parameter	Weight (g/sm)	Thickness (mm )	Air Permeability (m3/m2/min)	Tensile Strength (N/5×20cm)		Tensile Elongation(%)		Operating Temp.(°C/℉)	Max Surge Temp.(°C/℉)	Suitable P.H. value
Model	/	/	/	Warp	Weft	Warp	Weft	/	/	/
PP-01	550	3.5	10	1000	1500	50	50	130/266(Dry Heat)	150/302 (Dry Heat)	1~12
PP-05	400	2.5	20	500	1000	60	60			1~12
PP-10	400	2.2	24	500	1000	80	80			1~12
PP-25	400	3	35	500	1000	85	85			1~12
PP-50	320	3.5	100	500	600	100	80			1~12
PP-75	320	3.5	130	500	600	100	80			1~12
PP-100	350	3.8	100	500	500	100	100			1~12
PP-200	400	3.8	130	500	600	110	100			1~12

Filter Materials Physical and Chemistry Performance: (Superior to PE)

Fiber	Anbrasion resistance	Weakly acid	Strongly acid	Weakly alkali	Strongly alkali	Solvent	Temperature(℃/℉)
PP	Excellent	Excellent	Excellent	Excellent	Gerneral	Excellent	93/199.4-104/219.2