Attention before the operation of the pulse collector

Before the operation of the pulse dust collector, the staff should check all aspects of the inside of the pulse dust collector, if the reducer is flexible and lubricated, check the operation of the discharge equipment of the ash hopper, and ensure the normal operation of these accessories;

Check whether the ash discharge device and the ash transport device function normally;

The place where the dust collector is installed must be cleaned, roads, all operating inspection platforms, gangway handrails are complete and lighting is sufficient, there are shields or deflectors outside each rotating mechanism, and the control room must have measures to prevent cooling, dust and fire;

After installing the dust bag, check the bottom of the fabric bag and housing, the fabric bag and dividing plate, and the fabric bags, and do not touch each other.