Chat with us, powered by LiveChat
To solve the problem of bridge and disconnection, different methods of treatment should be adopted depending on the causes of bridge and disconnection: Bridge and disconnection solutions caused by needle problems (1) do not use blunt needles, they should be checked regularly and replaced in time. (2) a blowing device is installed next to the […]…
Posted on August 27, 2020
Problems with sewing thread (1) check if the quality of the sewing thread is rated. Moldy, damaged, or noxious sutures are more likely to break. (2) check if the selected sewing thread matches the needle. The sewing thread is too thin due to insufficient tenacity.A fine machine needle with sewing thread too thick will cause […]…
Posted on August 26, 2020
Jumping is a phenomenon where stitches can’t be formed continuously because the hook at the bottom of the machine can’t lift the top yarn or the top yarn slips after being hooked during the sewing process of the sewing machine.This is mainly due to the mismatch between the movement time or the movement position of […]…
Posted on August 25, 2020
The principle of the oil and water repellent filter bag: The reactive working fluid is used to prepare the filter media impregnated with the fluorine reactive agent so that the working fluid reacts with certain groups in the macromolecular structure of the filter fiber to form a macromolecular chain, which changes the affinity between the […]…
Posted on August 24, 2020
The filter material area of the filter is too small or the capacity of the unit is too small; The filtration efficiency of the prefilter is low; The life expectancy of the filter used is too high. For the first reason, switching to multiple filters with a large filtration area can prolong service life, which […]…
Posted on August 20, 2020
The main reasons for disconnection are: The tension of the line is too high, the line has fluff and the needle is overheated: The right to pass through the wire of the wire over the suture; Check that the pieces of the line are damaged or have sharp edges; The tension of the future should […]…
Posted on August 19, 2020
The efficiency, strength, air permeability, dust retention capacity, and service life of the dust collection bag are collectively referred to as filtration performance. Filtration efficiency of the dust collection bag. On the one hand, the filtration efficiency of the filter material is related to the structure of the filter material and, on the other hand, […]…
Posted on August 18, 2020
The stamping process is carried out using mechanical or hydraulic equipment. The advantages are high accuracy, smooth hole wall, and low cost. Our company processes dust collector cell plates throughout the year. Laser cutting Laser cutting adopts a high-speed laser of high power for cutting. The advantage is that the plate is not easily deformed […]…
Posted on August 17, 2020
The precision of the processing of the flower board will directly affect the verticality of the filter bag and the concentricity of the nozzle. The processing requirements mainly include 3 aspects for quality control: It is ensured that the spacing of the flower plate holes is controlled within 1 mm, and the processing of the […]…
Posted on August 13, 2020
Load more