Correct use of the powder bag
The correct installation method of the dust bag
(1) method of installing the external filter bag
Mouthpiece the mouth of the bag and the perforated plate are reliably sealed and fixed.
2) the filter bag is suspended vertically under the perforated plate.
3. Adjacent filter bags do not collide with each other.
Bagla filter bag and frame match correctly, and the frame is straight without burrs.
(2) method of installing the inner filter bag
1. A bag cap is installed on top of the filter bag and hung on the dust collector beam using a belt device, and the lower end is reliably sealed and secured with the lower bag.
2) the tension of the filter bag installation must be set to a fixed value so that the filter bag does not loosen and fall when the filter bag is examined and blown again, and adjust each fixture in the filter bag again during the first week and the first month of use (avoid deflated ring).
Reliable and effective cleaning
When the filter bag is in use, the dust area gradually increases, and the pressure difference increases. The powder must be effectively insulated to insulate the powder so that the pressure difference between the inside and outside of the filter bag remains within the established range.
Preventing sudden abnormal situations
When the bag filter is in operation, it should avoid sudden abnormal conditions such as a sudden rise in gas temperature through the corrosive gas inlet or a sudden drop in gas temperature below the dew point, etc., subject to temperature, moisture, chemical corrosion, mechanical wear or impact factors such as ultrafilter bags are damaged.
Maintenance of equipment
If the filter bag is damaged, it should be discovered and updated on time. Note the pressure difference of the bag dust collector. If the cleaning fault occurs, it must be removed in time. Whether the cleaning system functions normally.If the process conditions of the cleaning system change, the cleaning must be adjusted in time.The working system of the cycle or bag filter.