The principle of construction of the dust-collecting skeleton
The dust collector frame is also called the dust collector bag cage, also known as the dust collector frame. The frame of the dust collector is the rib of the filter bag. It should be light and easy to install and maintain. The quality of the frame directly affects the filtration status and service life of the filter bag. The skeleton of the dust collector is formed by welding the skeleton together with a high-frequency welding machine. Use an iron or stainless steel wire with sufficient strength and rigidity. The surface treatment of the dust collector skeleton is galvanized, plastic spraying, silicone coating, and other methods.
The dust collector frame material is made of high-quality carbon steel, which is formed at the same time using the frame production line, _ straightness, and torsion, the filter bag frame is smooth and burr-free after being welded and has sufficient strength to not be welded, not welded, virtual weld and leak weld phenomenon.
The skeleton of the dust collector adopts galvanized technology, the coating is firm, resistant to wear and corrosion, which prevents corrosion of the surface of the skeleton and adhesion of the filter bag after the dust collector operates for a period of time, which can achieve a smooth bag replacement and reduce the amount of bags during the bag replacement process. Damage to the fabric bags.
The skeleton of the dust collector is treated with silicone. There are usually two forms of this treatment: spray and submerge, and then dry at high temperature. This dust collector frame is suitable for “high temperature” working conditions, acid and alkali resistance, corrosion resistance, and long service life.
The dust collector frame adopts around the structure. The longitudinal reinforcement and a non-slip ring of the bag cage are evenly distributed and have sufficient strength and rigidity to prevent damage and deformation. A short cold stamping tube is added to the top to keep the bag case vertical and protect the safety of the mouth of the dust filter bag when spraying.
Besides, the bottom of the skeleton mouth is usually used in conjunction with the skeleton of the dust collector, which is used to attach the dust removal cloth bag or dust filter bag. The dust collector frame is also called the dust removal frame, which is formed by welding with special equipment at once. The structure of the dust collector is characterized by strong welding and a smooth and straight appearance. Round skeletons, trapezoidal skeletons, and spring skeletons are commonly used; some frames support venturi pendant covers, pendant devices, etc.